Trial fit of new o/s door runner track.
The door runner track were to badly corroded to be used so I have had to make up new tracks from scratch using bar and flat steel. The following pictures show the process.
More wonder materials used in the repairs to the side panels.
Now attention now turns to the n/s sill/door runner area.
Here the o/s step panel has been welded in and the bottom of the B post has been repaired.
The front outer step panel removed.
The following pictures show the new sill/door runner panel trial fitted in place,
The lower section of the o/s strengthening rib repaired.
The o/s sill/door runner panel removed.
This shows the back of the section that I cut away from the o/s side panel and it shows the strange materials used to "repair" the lower section of the side panel.
The new o/s front door well panel trial fitted.
Here I have made up a new o/s front door well panel.
Side door well panel badly corroded.
These pictures show all of the door step panels removed.
Here the o/s lower side panel has been cut away to reveal very corroded door runner/sill panel.
Morris JB Van registration OBL 432 as it arrived at my workshop. It was looking tidy but on closer inspection it was obvious that the bottom of both side panels were full of fibre glass, filler and other strange materials,
